Transient Emissions Accuracy Gap (TEAG)

GMI-PI-015Process IndustriesIntegration-RequiredPattern O-20: Transient Condition Blindness

Definition

Percentage difference between actual measured emissions during transient conditions (startups, shutdowns, grade transitions) and the AI's predicted emissions for the same transients: detecting whether the compliance system underreports during the highest-emission periods of plant operation.

The Measurement Gap

Predictive emissions monitoring (PEMS) and AI-augmented emission prediction systems train on steady-state operation because that is where most of the data lives. The transient periods (startup, shutdown, grade transition, feed change) are short, complex, and underrepresented in training data. They are also the periods when emission rates are highest. A reformer fired to bring catalyst up to operating temperature emits more NOx in two hours than the next twelve hours of steady operation. A flare with feed-quality variation during a transition can spike VOC emissions in a way that no steady-state model has learned to predict. CEMS data and PEMS-reported emissions both report numbers; only the gap between them during transients reveals whether the prediction system is operationally trustworthy. Annual emission inventories average across operating modes, hiding transient-specific underprediction. Reportable event counts capture exceedances after they happen, not the unmeasured emissions that fell below the legal threshold because the prediction system told the plant they did.

Decision Supported:

Is the AI emissions prediction system accurate during the transient conditions that produce the highest emission rates, and if not, is the facility unknowingly exceeding permit limits during startups, shutdowns, and transitions?

Formula

Plain language: For each transient event in the measurement period, take the actual measured emissions and the AI-predicted emissions. Sum the differences across events, divide by the sum of predictions, multiply by one hundred. Positive means the AI underestimated; negative means it overestimated.

Notation:

TEAG = ( Σ ( E_actual_transient_k − E_predicted_transient_k ) ) / ( Σ E_predicted_transient_k ) × 100

Variables:

Variable Definition Unit
E_actual_transient_k Actual measured emissions during transient event k (CEMS or reference method) lb of pollutant
E_predicted_transient_k AI-predicted emissions for the same transient event k lb of pollutant
k Index of transient events (startups, shutdowns, grade transitions, feed changes) n/a
Transient definition Non-steady-state operating periods pre-specified in the prediction system's scope n/a

Track TEAG per transient type; startup emissions, shutdown emissions, and grade transition emissions often have different signatures.

Proposed formula, pending validation pilots.

At a Glance

Unit
Percentage
Trend Direction
Lower; approaching 0
Reporting Frequency
Per transient event type (startup, shutdown, grade transition), quarterly summary
Category
Safety, Environmental and Regulatory Margin Governance
← SIS Proof Test Deferral Risk Index (SPTDRI)Turnaround Scope Deferral Index (TSDI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment