Definition
Measures the percentage of automated quality hold events where the lookback window captured all affected product, confirmed by the absence of post-release quality escapes traceable to the condition that triggered the hold.
The Measurement Gap
Automated quality hold systems are designed to contain suspect product when a quality condition is detected. The hold's effectiveness depends on two factors: the accuracy of the trigger (did the condition actually cause defects, measured by QHAR) and the sufficiency of the containment scope (did the hold capture all the affected product, measured by HCSR). Most organizations measure hold frequency and hold release time but do not systematically assess whether the hold actually contained everything it needed to contain.
The measurement gap is the absence of a feedback loop from post-release quality escapes back to the hold system's lookback window design. When a customer returns a defective product that was produced before the hold's lookback window, the warranty system processes the return and the quality system investigates the root cause. But nobody connects the escape back to the specific hold event and asks whether a wider lookback window would have caught it. HCSR creates this feedback loop by systematically tracing post-release escapes to the hold events that should have contained them, revealing whether the default lookback window is sufficient or needs to be extended.
Formula
HCSR divides the count of hold events with sufficient containment by the total count of hold events, expressed as a percentage.
HCSR = Holds_with_sufficient_containment / Holds_total times 100
Where Holds_with_sufficient_containment is the count of hold events where no post-release quality escapes (customer complaints, downstream defects, field returns) are traced to the pre-hold production period on the same asset and same failure mode. Holds_total is all automated quality hold events in the measurement period.
An HCSR of 100% means every hold captured all affected product, which is the target state. Lower values indicate containment escapes where the lookback window was too narrow. The critical consideration is assessment lag: containment sufficiency may only be assessable months later when field returns arrive. Use a trailing assessment window, evaluating holds from six or more months ago rather than recent holds, to allow sufficient time for escapes to surface.
Low hold volume with high HCSR is actually the best signal because it means the hold system triggers infrequently but contains effectively when it does. Low hold volume with low HCSR is concerning because the few holds that do fire are not capturing all affected product. Minimum sample is five hold events per assessment window, which means plants with infrequent holds may need a longer assessment period to accumulate sufficient data.
Proposed formula, pending validation pilots.