Regeneration Economic Yield (RGEY)

GMI-RAIL-039Rail TransportationInfrastructure-Dependent

Definition

Percentage of regenerative braking energy that was actually consumed by another train in the same electrical section at the time of regeneration, versus energy that was dissipated in braking resistors because no coincident load existed.

The Measurement Gap

The Measurement Gap

Electrified railroads report regenerative braking energy as a fuel savings number: kilowatt-hours returned to the catenary. What they don't report is whether that energy was actually used. When a train regenerates energy into the catenary, it only has economic value if another train in the same electrical section is simultaneously drawing traction power. If no train is drawing, the regenerated energy is dissipated as heat in braking resistors: the regeneration happened mechanically, but economically it was zero.

This gap matters because regeneration statistics can significantly overstate actual energy savings. A railroad reporting 15% energy recovery through regeneration may actually be realizing 5% if only a third of regeneration events coincide with traction demand. The rest is accounting fiction that flatters the efficiency numbers.

Decision Supported:

Is the regenerated energy the railroad reports actually delivering economic value, or is it a mechanical event with no economic effect? Should braking profiles be coordinated with traction demand in the electrical section? REY provides the economic-reality check on regeneration statistics.

Formula

Plain Language: When a train regenerates energy into the catenary, check whether another train in the same electrical section was simultaneously drawing traction power. If yes, the regenerated energy offset purchased energy. If no, the regenerated energy was dissipated as heat: mechanically real, economically zero.

Notation:

REY = Energy_consumed_by_others / Energy_regenerated_total

Variables:

Variable Definition Unit Source Classification
Energy_consumed_by_others Regenerated energy absorbed by coincident traction load in the electrical section kWh Traction power monitoring INTEGRATION
Energy_regenerated_total Total energy returned to the catenary by regenerative braking kWh Locomotive energy metering NATIVE

Sign Convention: 1.0 = all regeneration had economic value. 0.0 = all regeneration was wasted. Track by electrical section and time of day.

Edge Cases:

  • Grid-connected catenary: excess regeneration can sometimes be fed back to the utility grid. Track three categories: consumed by train (full value), fed to grid (partial value at feed-in tariff rate), dissipated (zero value).
  • Non-electrified territory: REY is undefined. Diesel-electric regeneration always dissipates in resistors unless the locomotive has battery-hybrid energy storage. Exclude diesel territory.
  • Minimum sample: 200 regeneration events per electrical section per measurement period.

Proposed formula, pending validation pilots.

At a Glance

Category
Energy Economics and Resource Optimization
← Consist-Adjusted Fuel Target Variance (CAFTV)Drayage Delivery Alignment Score (DDAS) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment