Drill-to-Blast Conformance Index (DBCI)

GMI-MIN-015MiningIntegration-Required

Definition

Degree to which autonomous drill pattern execution produces the fragmentation outcomes predicted by the blast design model.

The Measurement Gap

The Measurement Gap

Autonomous drill systems report per-hole compliance metrics: collar position accuracy, depth accuracy, and angle deviation for each hole individually. These metrics typically look excellent. A system averaging 0.15m collar deviation and 0.2-degree angle deviation across all holes appears to be delivering precision drilling. Operations use these averages to justify confidence in the autonomous system's output.

The blind spot is pattern-level geometry. If every hole deviates slightly in the same direction (all shifted 0.15m north, all angled 0.2 degrees toward the wall), the per-hole metrics remain within tolerance while the blast pattern has systematically shifted from the design. The consequences include altered burden and spacing ratios, compromised wall control, inconsistent fragmentation, and potential safety concerns from blast energy distribution changes.

The problem intensifies when autonomous drill AI adapts parameters based on real-time rock sensing. Each adaptation is logged and justified at the individual hole level. But nobody aggregates the adaptations to ask whether the cumulative effect has distorted the pattern geometry. A drill that "intelligently" moved 12 consecutive holes 0.2m deeper based on rock hardness data has effectively redesigned the bottom of the pattern without blast engineering review.

Legacy metrics count trees (individual holes) while missing the forest (pattern geometry). Without aggregate conformance measurement, operations accept per-hole precision as evidence of pattern fidelity.

Decision Supported:

Is the autonomous drill delivering the blast engineer's design, or is it adapting its way into a pattern that no longer matches the intended blast geometry?

Formula

Plain Language

For every hole in the pattern, measure the deviation between where the hole was actually drilled and where it was designed to be drilled across three dimensions: collar position, depth, and angle. Combine these deviations into a single composite metric, average across all holes, and compare to the site-specific tolerance. A score of 1.0 means the pattern perfectly matches the design. A score of 0.0 means the aggregate deviation exactly equals the maximum tolerance. Negative scores indicate the tolerance has been exceeded.

Notation

DBCI = 1 - (Pattern_deviation / Pattern_tolerance)

Where:

Pattern_deviation = sqrt(Sum(Delta_position_i^2 + Delta_depth_i^2 + Delta_angle_i^2) / N_holes)

Variables

Variable Description Source
Delta_position_i Absolute distance between the actual collar location and the designed collar location for hole i, measured in meters Autonomous drill system GPS survey data
Delta_depth_i Absolute difference between actual drilled depth and designed depth for hole i, measured in meters Drill encoder depth records
Delta_angle_i Absolute difference between actual drill angle and designed angle for hole i, measured in degrees (may require unit normalization) Drill inclinometer data
N_holes Total number of holes in the blast pattern Blast design specification
Pattern_tolerance Maximum acceptable aggregate deviation for the site, defined by blast engineering based on fragmentation requirements and wall control standards Blast engineering standards (site-specific)
Pattern_deviation Root-mean-square composite deviation across all holes and all three dimensions Calculated from drill survey and design data

Note: Delta_angle uses different units than Delta_position and Delta_depth. Normalization is required before combining. Use the site's angle-to-distance equivalence at the design depth to convert angular deviation to a linear metric, or define separate tolerance components for each dimension.

Proposed formula, pending validation pilots.

At a Glance

Unit
Index (0 to 1)
Trend Direction
Toward 1.0
Reporting Frequency
Per-blast
Category
Autonomous Drilling & Blast Outcome Alignment
← Shutdown Quality-Duration Trade-off Index (SQDI)Pattern Conformance Drift Index (PCDI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment