Phantom Zone Ventilation Rate (PZVR)

GMI-MIN-011MiningPilot-Ready

Definition

Proportion of underground work zones receiving ventilation based on stale or absent personnel and equipment tracking data.

The Measurement Gap

The Measurement Gap

VoD systems are typically evaluated on energy savings compared to full-volume ventilation. The headline metric is simple: how many kilowatt-hours (or dollars) did VoD save this month versus the baseline? That number looks impressive on energy reports, but it assumes the VoD system's occupancy model is accurate. If the tracking system shows a zone as occupied when it is empty, the VoD system dutifully delivers full airflow to an empty heading, and the energy savings calculation never notices the waste because it was "demand-driven."

Legacy tracking metrics focus on tag read rates and system uptime rather than occupancy accuracy. A tracking system can report 99% tag read success while systematically mislocating personnel into the wrong zones, creating phantom occupancy that the VoD system treats as real demand. Zone boundary definitions compound the problem: a tag in a lunch room physically adjacent to a production heading may register as "in-zone" due to coarse boundary definitions, triggering unnecessary ventilation.

The blind spot is the gap between what the VoD system believes and what is actually true. Without independent validation of occupancy state, the energy savings that justify VoD investment may be significantly overstated.

Decision Supported:

Is the VoD system's occupancy model accurate, and how much energy is wasted ventilating empty zones that tracking tags say are occupied?

Formula

Plain Language

Compare the VoD system's occupancy records against independent evidence of where people actually were. Every zone-hour where VoD said "occupied" but independent sources say "empty" is a phantom. Divide phantoms by total ventilated zone-hours to get the rate. Then multiply each phantom zone-hour by the airflow delivered, fan power cost, and electricity rate to calculate the dollar cost of the inaccuracy.

Notation

PZVR = Phantom_zone_hours / Total_ventilated_zone_hours

Energy cost:

Phantom_energy_cost = Sum(Airflow_phantom_zone x Fan_power_factor x Electricity_rate x Duration)

Variables

Variable Description Source
Phantom_zone_hours Zone-hours where VoD records show occupied status but independent validation confirms no personnel or equipment present Cross-reference of VoD logs and independent validation
Total_ventilated_zone_hours All zone-hours where VoD provided occupancy-level airflow (excludes zones at baseline/idle ventilation) VoD control system logs
Airflow_phantom_zone Actual airflow delivered to each phantom zone during phantom hours (m3/s) SCADA airflow records
Fan_power_factor Energy consumption per unit airflow (kW per m3/s), accounting for system efficiency and fan curve position Ventilation engineering calculations
Electricity_rate Cost per kilowatt-hour ($/kWh) Utility billing records
Duration Length of each phantom zone-hour interval (hours) Calculated from VoD logs

The energy cost calculation transforms an abstract accuracy percentage into a tangible financial figure that justifies investment in tracking system improvements or zone boundary reconfiguration.

Proposed formula, pending validation pilots.

At a Glance

Unit
Percentage
Trend Direction
Lower
Reporting Frequency
Weekly
Category
Ventilation Intelligence & Safety Margin Governance
← Emergency Ventilation Response Latency (EVRL)Safety Margin Consumption Index (SMCI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment