Safety Margin Consumption Index (SMCI)

GMI-MIN-009MiningIntegration-Required

Definition

Proportion of the regulatory safety margin between minimum ventilation requirements and actual delivered ventilation that has been consumed by VoD energy optimization.

The Measurement Gap

Ventilation on Demand systems reduce underground mine ventilation energy costs by modulating airflow based on real-time occupancy and activity data rather than running fans at fixed maximum capacity. The energy savings are real and measurable, making VoD an attractive investment. Traditional ventilation metrics track fan power consumption, airflow volumes, and compliance with minimum regulatory airflow requirements. These metrics confirm that the system is saving energy and meeting regulatory minimums, but they are blind to a critical question: how much safety buffer remains?

Under fixed-schedule ventilation, the mine typically operates with substantial excess airflow above regulatory action levels. This excess is wasteful from an energy perspective but provides a large buffer against surprise gas events (methane inflows, CO from spontaneous combustion, blasting gases). VoD reduces this excess to save energy. Legacy metrics like fan energy cost, airflow volume, and regulatory compliance percentage cannot quantify how much buffer has been consumed. Physical Availability, MTBF, MTTR, and PM Compliance are equipment metrics with no connection to atmospheric safety margins. Even gas monitoring alarm rates, the closest traditional safety metric, only trigger when the margin has already been consumed.

Decision Supported:

Is VoD genuinely safe, or is it saving energy by operating closer to regulatory limits than the fixed-schedule system did, and how much buffer is left for surprise events?

Formula

Plain Language: For each gas monitored (methane, carbon monoxide, etc.) and each monitoring point, calculate the average headroom between the actual concentration and the regulatory action level. Do this for both the VoD period and the baseline fixed-ventilation period. SMCI is the VoD headroom expressed as a percentage of the baseline headroom. If the baseline had 0.6% CH4 headroom and VoD has 0.42% CH4 headroom, SMCI is 70%, meaning 30% of the original safety buffer has been consumed.

Notation:

SMCI = (Margin_VoD / Margin_baseline) x 100

Where Margin = mean(Action_level_g - Actual_concentration_g) across all gases g and zone-time measurements

Variable Definition Unit
Action_level_g Regulatory action level for gas g (e.g., 1.0% CH4, 25 ppm CO) Gas-specific concentration units
Actual_concentration_g Measured gas concentration at monitoring point Gas-specific concentration units
Margin_VoD Average headroom between actual gas concentration and action level under VoD operation Gas-specific concentration units
Margin_baseline Average headroom between actual gas concentration and action level under fixed-schedule ventilation Gas-specific concentration units

A result of 100% means VoD maintains the same safety buffer as fixed ventilation. A result of 70% means 30% of the buffer has been consumed by the energy optimization.

Proposed formula, pending validation pilots.

At a Glance

Unit
Percentage
Trend Direction
Lower
Reporting Frequency
Per-shift
Category
Ventilation Intelligence & Safety Margin Governance
← Phantom Zone Ventilation Rate (PZVR)Condition Monitoring Analyst Skill Index (CMASI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment