Quality Capability Remaining Useful Life (QCRUL)

GMI-MFG-035ManufacturingInfrastructure-Dependent

Definition

An asset can be mechanically healthy while its quality capability has degraded past the point of acceptability, and QCRUL measures when that quality threshold will be reached.

The Measurement Gap

Maintenance strategy optimization focuses overwhelmingly on preventing failure. The PM interval is set based on when the asset is likely to fail, the PdM model predicts remaining time to failure, and the lifecycle model projects when maintenance costs will exceed replacement costs. All of these frameworks optimize for mechanical availability, not for quality capability. An asset can have 36 months of mechanical RUL remaining while its quality capability will cross the minimum threshold in 12 months.

The measurement gap is the absence of any quality-based replacement timeline. Capital planning receives a mechanical RUL that says the asset has years of life remaining, but nobody tells them that the asset will be unable to produce to tight tolerances in six months. The result is that the maintenance strategy is optimized for the wrong objective. The asset will be running, will not be failing, and will be producing out-of-specification parts while mechanically healthy. QCRUL provides the missing input for capital planning by projecting the quality-based replacement timeline alongside the mechanical-based timeline, enabling the organization to plan for whichever limit is reached first.

Formula

QCRUL extrapolates the asset's Cpk degradation trend forward to the point where Cpk crosses the minimum acceptable threshold, expressing the result in months.

QCRUL = (Cpk_threshold minus Cpk_current) / |Cpk_trend_slope|

Where Cpk_current is the most recent process capability index for the asset (dimensionless). Cpk_threshold is the minimum acceptable Cpk for production on this asset, typically 1.33 for standard applications or 1.67 for safety-critical applications (dimensionless). Cpk_trend_slope is the average monthly change in Cpk over the trending period, which is negative for degrading assets (dimensionless per month).

A positive QCRUL represents months until quality capability is exhausted. A negative QCRUL means Cpk has already crossed the threshold and quality is currently below the minimum acceptable level. Larger positive values indicate more remaining quality life.

Edge cases include non-linear degradation where Cpk may degrade slowly and then accelerate as wear progresses. In such cases, use the last six months of trend data rather than the full 12 months if acceleration is suspected. Cpk resets after maintenance present a special case: if PM restores Cpk, QCRUL should be computed from the post-PM Cpk and the degradation rate between PMs (which is IMQDR). QCRUL then becomes the number of PM intervals remaining before the post-PM Cpk itself degrades below threshold, indicating that even maintenance can no longer restore quality capability. Process capability varies by product, so compute QCRUL per product type. An asset may have years of QCRUL for forgiving products and months for precision products. Minimum data requirement is six months of monthly Cpk data.

Proposed formula, pending validation pilots.

At a Glance

Unit
Time (months)
Trend Direction
Higher
Reporting Frequency
Quarterly
Category
Equipment Lifecycle Quality Capability
← Thread Integrity Score (TIS)Workaround-Masked Degradation Index (WMDI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment