Definition
Measures the hidden production cost accumulated on an asset where production has compensated for equipment degradation.
The Measurement Gap
Equipment lifecycle models determine when to replace or overhaul an asset based on maintenance cost trends, failure rates, and remaining useful life projections. These models assume that production output is an accurate reflection of asset capability. When production compensates for degradation through workarounds, the model receives distorted inputs because production appears stable even though the asset is deteriorating. The result is lifecycle extension decisions that look economically sound in the model but are actually consuming value through hidden production costs.
The measurement gap is the absence of any metric that captures the cost of production compensations. Throughput reduction is tracked in production reports but attributed to scheduling or demand, not to equipment capability loss. Extra inspection steps are built into quality plans but not traced to specific asset degradation. Rework rates are tracked at the product level, not at the asset level where the degradation occurs. Operator parameter adjustments happen informally and are rarely logged. WMDI aggregates these scattered costs into a single metric that reveals the true cost of keeping a degraded asset in production, providing the lifecycle model with the missing cost input it needs to make accurate replacement decisions.
Formula
WMDI sums the hidden production costs attributable to equipment degradation workarounds and divides by the total production value generated by the asset, expressing the result as a percentage.
WMDI = (C_throughput_penalty + C_extra_inspection + C_rework_premium + C_operator_compensations) / Value_of_production_on_asset
Where C_throughput_penalty is the cost of reduced throughput compared to the asset's rated capacity or like-new throughput, calculated as lost units multiplied by margin per unit. C_extra_inspection is the cost of additional inspection steps not required on newer assets of the same type, including labor and equipment time. C_rework_premium is the rework cost above the plant's standard rework rate for this product, isolating the asset-driven rework from product-driven rework. C_operator_compensations is the labor cost of manual parameter adjustments that compensate for equipment capability loss. Value_of_production_on_asset is the total production value generated by the asset in the measurement period.
A WMDI of 0% means no workaround costs, indicating the asset is performing at full capability. Higher values indicate more hidden cost being absorbed by production. The throughput penalty calculation requires knowing the asset's rated or like-new throughput. If the original specification is not available, use the best-performing asset of the same type as the benchmark. Operator compensations are often invisible because adjustments happen out of habit. Capturing this data in a pilot requires focused time studies or structured self-reporting. Minimum measurement period is three months of production data per asset.
Proposed formula, pending validation pilots.