Stowage Deviation Stability Index (SDSI)

GMI-MAR-029Maritime IndustriesIntegration-Required

Definition

Maximum stability parameter deviation from the approved stowage plan during AI-directed crane operations.

The Measurement Gap

What This Metric Measures

SDSI measures the degree to which AI-directed crane sequencing deviates from the approved stowage plan in ways that affect the vessel's stability parameters (metacentric height (GM), shear forces, and bending moments) during cargo operations. At regular checkpoints throughout loading or discharge, the metric compares the vessel's actual loading condition based on actual container positions and weights against the stowage plan's predicted condition at that point in the sequence.

The Decision It Supports

Is the AI crane optimizer maintaining vessel stability within the approved stowage plan envelope, or is it deviating in ways that create stability risk during loading and discharge that the chief officer may not be monitoring in real time? The stowage plan is the safety contract between the terminal and the vessel: deviations from the approved sequence can create transient stability conditions that exceed safe limits even if the final loaded condition is acceptable.

Why Legacy Metrics Cannot See This

Legacy terminal productivity metrics track crane moves per hour, gross moves per vessel, and container handling throughput. The stowage plan is treated as a constraint that the crane sequence must satisfy at completion, not during execution. No metric monitors whether the AI's crane sequencing creates intermediate loading conditions that deviate from the stability envelope. A terminal might report excellent crane productivity while the AI's optimized sequence routinely creates transient GM values 15% below the stowage plan's intended minimum during mid-operation, a stability risk that resolves by the time loading completes but existed throughout the operation. SDSI captures the worst-case mid-operation deviation, not just the final-condition compliance.

Formula

Primary Formula

SDSI = Max(|GM_actual_t − GM_plan_t| / GM_plan_t) across all checkpoints t

Variable Definitions

  • GM_actual_t = actual metacentric height at checkpoint t based on actual container positions and weights (meters)
  • GM_plan_t = planned metacentric height at checkpoint t per approved stowage plan (meters)
  • Checkpoints occur every 50 crane moves or every 30 minutes, whichever is more frequent

Units: Percentage deviation. 0% indicates perfect adherence to the stowage plan stability envelope throughout the operation. Higher values indicate greater stability deviation from plan during cargo operations.

Edge Cases

Container weight variances (where actual weight differs from declared weight) contribute to SDSI independent of sequencing deviations. Decompose weight-driven deviation from sequence-driven deviation if data quality permits. Discharge operations have different stability implications than loading operations and should be tracked separately because removing containers from high tiers reduces GM through different mechanisms than adding containers to low tiers. Minimum measurement is per vessel call across the full loading or discharge operation.

Proposed formula, pending validation pilots.

At a Glance

Unit
Percentage
Trend Direction
Lower; approaching 0%
Reporting Frequency
Per vessel cargo operation
Category
Port & Terminal Optimization Integrity
← Port Arrival Forecast Accuracy (PAFA)Condition Monitoring Equipment Family Calibration (CMEFC) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment