Berth Cascade Amplification Factor (BCAF)

GMI-MAR-028Maritime IndustriesPilot-Ready

Definition

Ratio of total downstream delay to the initial arrival deviation measuring optimizer disruption amplification.

The Measurement Gap

What This Metric Measures

BCAF measures the ratio of total downstream disruption (in vessel-hours of delay across all affected vessels) to the initial triggering event, which is one vessel's arrival deviation from the AI forecast. It quantifies how much the AI berth optimization system amplifies or dampens a single input error as it propagates through berth reallocation, crane resequencing, yard slot reassignment, and truck dispatch changes.

The Decision It Supports

Is the port's AI scheduling system amplifying disruptions or absorbing them, and how much buffer does the system need to prevent cascade failures? A BCAF of 1.0 means the system contained the disruption. A BCAF of 5.0 means a single vessel arriving 4 hours late created 20 vessel-hours of total delay across the terminal. The port operations team needs this metric to calibrate scheduling buffers and evaluate whether the optimizer's resequencing algorithm is helping or amplifying volatility.

Why Legacy Metrics Cannot See This

Legacy terminal performance metrics track vessel turnaround time, berth utilization, crane moves per hour, and vessel waiting time as independent KPIs. When a vessel arrives late, each downstream metric records its own local impact. No metric traces the cascade from the triggering event through the optimizer's resequencing decisions to the total system-wide impact. A port might report that average vessel waiting time increased by 30 minutes during a shift, but without BCAF, nobody knows that 80% of that increase was caused by the optimizer's response to a single late arrival: amplifying a 3-hour deviation into 15 vessel-hours of total disruption because it resequenced 6 other vessels instead of absorbing the delay with buffer time.

Formula

Primary Formula

BCAF = Total_downstream_delay_hours / Initial_arrival_deviation_hours

Variable Definitions

  • Total_downstream_delay_hours = sum of all additional waiting time, berth reallocation delay, and crane idle time imposed on other vessels as a result of the optimizer resequencing around the deviant arrival (vessel-hours)
  • Initial_arrival_deviation_hours = |actual_arrival − forecasted_arrival| for the triggering vessel (hours)

Units:

Dimensionless multiplier. BCAF of 1.0 means the disruption was contained: one hour of deviation produced one vessel-hour of total impact. BCAF below 1.0 means the optimizer dampened the disruption. BCAF of 5.0 means the disruption was amplified fivefold.

Edge Cases

Multiple simultaneous arrival deviations should be computed per triggering event where possible, or aggregated as BCAF_portfolio for the period when individual attribution is impractical. Deviations within the optimizer's built-in buffer should not cascade. If they do, the buffer is undersized. Minimum sample of 20 arrival deviations exceeding 2 hours per measurement period is required for reliable BCAF computation.

Proposed formula, pending validation pilots.

At a Glance

Unit
Ratio
Trend Direction
Lower; below 2.0
Reporting Frequency
Per arrival deviation event
Category
Port & Terminal Optimization Integrity
← PdM-Procurement Synchronization Rate (PPSR)Port Arrival Forecast Accuracy (PAFA) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment