Definition
Excess energy consumed and comfort quality lost due to building system degradation that has not crossed a failure threshold: the hidden cost of running degraded-but-operational equipment.
The Measurement Gap
Building systems degrade continuously between maintenance events. A chiller losing 18% efficiency consumes significantly more energy and delivers marginally less cooling, but it has not tripped an alarm and is not predicted to fail soon. PM Compliance counts schedule adherence. MTTR counts repair speed. EUI measures total energy per square foot. None of them isolate the energy waste and comfort erosion attributable to sub-failure-threshold degradation. Occupants experience gradual comfort drift (hot spots, humidity excursions) that appears in satisfaction surveys months later with no link to the system degradation that caused it. The cost of degraded-but-operational equipment is real, ongoing, and invisible to every standard facilities metric.
Decision Supported:
How much is the building's degraded-but-operational equipment costing in energy waste and comfort erosion that no alarm, work order, or PM compliance metric can see?
Formula
Plain language: For each monitored building system, compare current energy consumption and output quality (discharge air temperature, cooling capacity, heating efficiency) against the system's baseline performance when newly installed or last commissioned. The gap (energy consumed above baseline for the same output, plus comfort deviation from design conditions) is the degradation comfort tax.
Notation:
DCT = Σ [(Energy_current_s − Energy_baseline_s) × Cost_per_kWh + Comfort_deviation_s × Cost_per_comfort_unit]
Variables:
| Variable | Definition | Unit |
|---|---|---|
| Energy_current_s | Current energy consumption of system s for a standard load profile | kWh |
| Energy_baseline_s | Energy consumption of system s at the same load profile when newly installed or last commissioned | kWh |
| Cost_per_kWh | Blended energy rate | $/kWh |
| Comfort_deviation_s | Deviation of system s output from design conditions (degrees off setpoint, CFM below design, lumens below spec) | Composite |
| Cost_per_comfort_unit | Estimated cost of comfort deviation (occupant productivity impact, complaint handling, portable unit rental) | $/unit |
Proposed formula, pending validation pilots.