Definition
Measures the delta between the battery management AI's predicted degradation trajectory and actual observed degradation, attributing excess capacity loss to the AI's charge and discharge optimization profile.
The Measurement Gap
Battery management AI systems optimize charge and discharge profiles for grid arbitrage and demand response. These systems include degradation models that predict how their cycling will affect battery capacity over time. The gap: the model's predictions are based on assumptions about cycling depth, temperature, and C-rate. If the actual cycling profile deviates from those assumptions (cycling more deeply, at higher rates, or under thermal conditions the model didn't account for) actual degradation will exceed predictions. No current maintenance metric detects this divergence until a battery test reveals dramatically reduced capacity, often years after the divergence began. By that point, UPS runtime is shorter than operators believe, and replacement cost is unexpected.
Decision Supported:
Is the AI's grid arbitrage and demand response cycling degrading batteries faster than the degradation model predicts, and what is the additional replacement cost?
Formula
Plain language: Subtract actual measured battery capacity from the degradation model's prediction of remaining capacity at the same point in time. Express as a percentage of rated capacity. Positive values mean actual degradation exceeds predictions: the dangerous direction.
Notation:
BDAI = (Capacity_predicted − Capacity_actual) / Capacity_rated
ERC = Σ (BDAI_bank_i × Replacement_cost_bank_i × Acceleration_factor_bank_i) for all banks
Acceleration_factor = (years_to_replacement_predicted − years_to_replacement_actual) / years_to_replacement_predicted
Variables:
| Variable | Definition | Unit |
|---|---|---|
| Capacity_predicted | Degradation model's predicted remaining capacity at time t | kWh |
| Capacity_actual | Measured remaining capacity at time t via impedance or capacity testing | kWh |
| Capacity_rated | Original rated capacity | kWh |
| BDAI_bank_i | BDAI value for battery bank i | % |
| Replacement_cost_bank_i | Full replacement cost for bank i | $ |
| Acceleration_factor_bank_i | Fraction of expected lifetime consumed by excess degradation | Dimensionless |
| ERC | Excess Replacement Cost companion metric | $ |
Proposed formula, pending validation pilots.