Process Envelope Utilization Index (PEUI)

GMI-WT-001Water TreatmentPilot-Ready

Definition

Measures how much operating headroom remains between current autonomous-controlled setpoints and the process design limits, reported as a single index from 0 (at design limits) to 1 (at design center).

The Measurement Gap

Autonomous chemical dosing, aeration control, and process optimization systems gradually shift operating points toward constraint boundaries as they chase cost efficiency. Each individual adjustment falls within acceptable ranges, but cumulative drift moves the treatment process toward a brittle state with less headroom for upsets. Steady-state performance metrics (turbidity, chlorine residual, BOD removal percentage) remain stable while resilience to storm events, algal blooms, or equipment failures degrades invisibly. No legacy metric measures distance from the process design envelope or remaining headroom for upset absorption.

Decision Supported:

How much resilience does the plant have right now to absorb an upset without violating process limits, and is autonomous optimization systematically consuming that resilience over time?

Formula

Plain language: For each parameter the autonomous system controls, calculate how far the current setpoint is from the center of the acceptable range, as a fraction of the total distance from center to limit. Weight the parameters by consequence severity. Average them. Subtract from 1 so that 1 means maximum headroom and 0 means operating at the edge.

Notation:

PEUI = 1 − [ Σ (Wₚ × |SPₚ − DCₚ| / |DLₚ − DCₚ|) ] / Σ Wₚ

Variables:

Variable Definition Unit
SPₚ Current autonomous setpoint for parameter p Units vary by parameter
DCₚ Design center value for parameter p: the intended operating point under normal conditions Units match SPₚ
DLₚ Design limit for parameter p: the constraint boundary (permit limit, equipment rating, or process stability threshold, whichever is tightest) Units match SPₚ
Wₚ Consequence weight for parameter p: engineering judgment of severity if the limit is reached (1–10 scale) Dimensionless
p Index across all autonomous-controlled parameters (coagulant dose, chlorine dose, pH target, DO setpoint, polymer dose, blower speed, etc.) n/a

Proposed formula, pending validation pilots.

At a Glance

Unit
Index (0 to 1)
Trend Direction
Toward 1.0
Reporting Frequency
Daily with rolling 7-day trend
Category
Autonomous Process Governance
← Override Value Index (OVI)Regulatory Margin Index (RMI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment