Definition
The fraction of AI-augmented receipt inspections on regulated parts that cover the full scope required by the applicable regulatory standard, including visual, dimensional, material traceability, certificate of conformance, and any additional mandated elements.
The Measurement Gap
Legacy MRO supply chain metrics measure receipt inspection throughput and rejection rate without measuring regulatory scope completeness. Receipt inspection cycle time rewards speed. AI inspection pass rate measures AI throughput. Rejection rate measures volume rejected. None tells you whether the inspection performed actually covered every element the regulatory standard requires for that part class. When the AI covers visual marking, dimensional check, and lot-traceability but the standard also requires material composition verification, CofC deep validation, hardness sampling, and physical seal-integrity verification, the AI passes the receipt on a partial scope. The throughput win is built on regulatory non-compliance that surfaces as audit findings six months later. In regulated industries (aerospace (AS9100/AS6081), nuclear (NQA-1), pharmaceutical (21 CFR 820)) an inspection that misses mandated elements is not a partial success; it is a compliance failure with audit consequences, potential recall exposure, and personal liability for the quality manager who signed off.
Decision Supported:
Whether AI inspection can stand alone or must be paired with manual inspection by regulatory class, and whether automated receipt is compliant or creates regulatory exposure that accumulates invisibly until the next audit.
Formula
RIAR = full_scope_inspections / total_AI_inspections_on_regulated_classes
Variables:
- full_scope_inspections = receipts where every required inspection element was performed at meaningful sensitivity
- regulated_class = part classified under AS9100, NQA-1, GxP, FSMA, FDA 21 CFR 820, or other applicable program
- Compute per regulatory program separately
Worked example: Aerospace AS9100 receipts last quarter: 1,840. Required elements per AS9100 receiving requirements: visual, dimensional, material traceability, CofC, hardness sampling for safety-critical lots, serial-level validation for serialized items. Receipts where all required elements performed: 1,118. RIAR (AS9100) = 1,118 / 1,840 = 0.607. About 39% of receipts did not get full required scope, an audit-risk concentration.
Edge cases: Required scope is class-specific. Must be enumerated per regulatory program. RIAR is binary at the receipt level (full scope or not). Partial scope on a single receipt does not count toward the numerator. Track per program: AS9100, NQA-1, GxP, FSMA results may vary independently.
Data sources: Regulated-class identification from item-master regulatory tagging. Required scope per class from regulatory program documentation. Inspection elements performed from inspection workflow log: must capture both AI and manual elements as structured records.
Proposed formula, pending validation pilots.