Generative Design Validation Coverage Index (GDVC)

GMI-MFG-008ManufacturingInfrastructure-Dependent

Definition

Measures the percentage of known failure mode categories covered by validation analysis before an AI-generated design is released to production.

The Measurement Gap

Traditional design validation follows a fixed checklist: run FEA for structural loads, conduct thermal analysis if applicable, perform vibration testing per specification. The checklist was built from decades of experience with human-designed parts. When a designer creates a geometry, they draw on intuition about which failure modes matter, and the validation plan reflects that intuition.

Generative design breaks this model. AI-generated geometries can be radically different from anything previously produced. Lattice structures, topology-optimized load paths, and novel material distributions create failure mode profiles that don't map neatly to existing checklists. The gap is not that organizations skip validation. The gap is that they validate against the wrong set of failure modes, missing categories that are uniquely relevant to the AI-generated geometry.

Without GDVC, organizations have no way to detect this coverage gap. A design can pass every test on the checklist and still fail in the field because the checklist never included the failure mode that mattered. GDVC makes validation thoroughness visible as a measurable ratio rather than an assumed condition.

Formula

GDVC is calculated as the ratio of validated failure mode categories to relevant failure mode categories for a given design:

GDVC = FM_validated / FM_relevant x 100

Where:

  • FM_validated = number of relevant failure mode categories with explicit validation evidence (FEA results, test data, or analysis report) in the design review package (count)
  • FM_relevant = number of failure mode categories relevant to the design's application, material, and operating environment (count, per engineering judgment and historical failure data)

A score of 100% means every relevant failure mode category has been validated before production release. Lower scores indicate unvalidated risk. A design scoring 60% has 40% of its relevant failure modes with no validation evidence.

Key considerations for accurate measurement: The "relevant failure modes" list requires engineering judgment. Organizations should establish a standard failure mode checklist per product family and material type, updated annually. If no historical failure data exists for a novel geometry or material combination, expand the relevant failure mode list conservatively by including more categories, not fewer. Distinguish between "validated by analysis" and "validated by test," since analysis alone is weaker evidence for novel geometries where the physics may not be fully captured by simulation models. Minimum sample size for portfolio-level GDVC trending is 15 design releases per measurement period.

Proposed formula, pending validation pilots.

At a Glance

Unit
Percentage
Trend Direction
Higher
Reporting Frequency
Quarterly
Category
Generative Design-to-Manufacturing Alignment
← Design-Manufacturing Feedback Loop Index (DMFLI)Alert Response Timing Value Index (ARTVI) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment