Cargo Fitness Inspection Coverage Index (CFICI)

GMI-MAR-005Maritime IndustriesInfrastructure-Dependent

Definition

Percentage of cargo-specific inspection criteria assessable by CV-based cargo hold inspection for a given cargo type.

The Measurement Gap

What This Metric Measures:
Percentage of cargo-specific inspection criteria (per the International Grain Code, IMSBC Code, IBC Code, or charterer requirements) that a CV-based cargo hold inspection system can assess, measured against the full inspection standard for the specific cargo to be loaded. CFICI quantifies the gap between what the CV system evaluates (general visual condition) and what cargo fitness requires (moisture, contamination, coating compatibility, residue standards).

The Decision It Supports:

Can a CV-based hold inspection clear a cargo hold for a specific cargo type, or does it only assess general visual condition while leaving cargo-specific fitness criteria unaddressed? When the vessel is nominated for a grain cargo, does the CV inspection cover the Grain Code requirements, or does it produce a general cleanliness assessment that leaves P&I-relevant criteria unmeasured?

Why Legacy Metrics Cannot See This:

Hold inspection pass/fail rates report whether the hold was cleared for loading. They do not distinguish between a comprehensive cargo-specific fitness assessment and a general visual inspection that happens to conclude the hold is acceptable. A CV system reporting "hold clean" for a grain cargo may have assessed surface cleanliness while completely missing odor contamination, moisture content, or insect infestation: all of which are Grain Code requirements that CV structurally cannot assess. The cargo claims that result from these gaps are attributed to hold condition, not to inspection method limitations.

Formula

Primary Formula:

CFICI = Cargo_criteria_CV_can_assess / Total_cargo_criteria_required

Variable Definitions:

Cargo_criteria_CV_can_assess: cargo-specific inspection criteria for which the CV system has validated assessment capability. Count of assessable criteria.

Total_cargo_criteria_required: total inspection criteria for the specific cargo under the applicable code (Grain Code for grain, IMSBC for solid bulk, IBC for chemicals) plus any charterer or P&I surveyor requirements.

Units:

Percentage. Computed per cargo-vessel combination. CFICI will always be below 100% for cargoes with non-visual requirements such as moisture content, odor, or chemical compatibility testing.

Edge Cases:

Cargo criteria include non-visual elements (moisture content, odor, chemical compatibility) that are structurally beyond CV capability. CFICI will always be less than 1.0 for cargoes with these requirements. Charterer requirements may exceed code requirements: use the more demanding standard as the denominator. Minimum sample: compute per cargo-vessel combination at each loading event.

Proposed formula, pending validation pilots.

At a Glance

Unit
Percentage
Trend Direction
Higher
Reporting Frequency
Per cargo-vessel combination
Category
Regulatory Compliance Intelligence
← Operating Condition-Adjusted RUL Accuracy (OCRA)CV Inspection Regulatory Scope Coverage (IRSC) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment