Definition
CISCR measures the ratio of sensor-monitored failure modes to total failure modes for a given PM task.
The Measurement Gap
The Decision This KPI Enables:
When a healthcare facility reports that condition-based monitoring covers a critical asset, does that coverage extend to all failure modes documented in OEM preventive maintenance procedures, or only to the subset detectable by installed sensors?
Why Legacy Metrics Miss This:
Traditional CBM metrics track sensor uptime and alert volume: whether sensors are functioning and generating data. A facility can report 98% CBM sensor uptime while monitoring only vibration and power draw on an imaging system whose OEM PM checklist includes 22 inspection points spanning mechanical latches, fluid seals, cable integrity, cosmetic surfaces affecting infection control, and calibration verification. Sensor-based monitoring may cover 8 of those 22 points. The remaining 14 failure modes (seal degradation that allows fluid intrusion, latch wear that creates patient positioning risk, cable strain relief failure) require physical inspection and have no sensor equivalent.
The measurement gap compounds when organizations use CBM data to justify extending PM intervals. If sensors cover 36% of documented failure modes but the PM extension applies to 100% of inspection points, the organization has created unmonitored risk windows for every failure mode outside sensor scope. This is particularly dangerous for failure modes with safety implications: a degraded mechanical latch on a patient positioning system creates fall risk that no vibration sensor will detect. CISCR forces the question that CBM adoption dashboards avoid: what percentage of OEM-documented failure modes actually have monitoring coverage, and what happens to the rest?
Formula
CISCR = (FM_monitored / FM_total) × 100
Where:
- FM_monitored = Count of OEM-documented failure modes with active monitoring coverage (sensor-based or structured inspection protocol) for a given asset or asset class
- FM_total = Total count of failure modes documented in OEM preventive maintenance procedures for that asset or asset class
Unit of Measure: Percentage (0-100%)
Measurement Frequency:
Quarterly per asset class; updated when CBM sensors are added, OEM procedures are revised, or PM programs are restructured
Data Requirements:
- OEM preventive maintenance procedures with failure mode decomposition per asset class
- Sensor installation records mapped to specific failure modes (not just asset assignment)
- Structured inspection protocols that supplement sensor coverage
- CMMS/EAM asset records with CBM program enrollment status
Calculation Notes: Failure mode enumeration should follow OEM PM procedures, not generic failure mode libraries. A failure mode counts as "monitored" only if there is an active detection mechanism (sensor, structured inspection checklist, or automated test) with a defined alert threshold. Visual inspections during corrective work do not count as monitoring coverage. Organizations should document which failure modes are intentionally excluded and the risk acceptance rationale.
Proposed formula, pending validation pilots.