CV Detection Threshold Alignment Rate (CVDTAR)

GMI-AVI-034AviationIntegration-Required

Definition

The percentage of structural inspection zones in which the computer vision model's configured detection threshold meets or exceeds the acceptance limit specified in the Structural Repair Manual or equivalent engineering standard. A score below 100% means the organization is deploying CV inspection at sensitivity levels that do not satisfy regulatory and engineering requirements for at least some zones.

The Measurement Gap

Legacy inspection quality metrics (pass/fail rates, defect counts, inspector sign-off ratios) record outcomes but never examine whether the tool producing those outcomes is calibrated to engineering requirements. A fleet reporting 98% inspection pass rates may have CV models configured below SRM acceptance thresholds in 15% of structural zones. Standard audit metrics will not surface this. The model is finding what it finds; nobody has verified it is looking with the right sensitivity.

CVDTAR fills this specific gap. It compares CV model threshold configuration to engineering-specified acceptance limits at the zone level. It answers the question legacy systems cannot: not "did we inspect?" but "is the inspection tool configured to the standard required?" Catching threshold drift before a regulatory audit (or before a structural defect passes through an under-sensitive zone) is what this metric is for. Organizations deploying CV inspection without CVDTAR are operating an unvalidated substitution for human judgment.

Formula

Plain language: Divide the number of inspection zones where the CV model threshold is at or above the SRM acceptance limit by the total number of CV-covered inspectable zones, then multiply by 100.

Notation:
CVDTAR = (Z_aligned / Z_total) × 100

Variables:

Variable Definition Source
Z_aligned Zones where CV detection threshold ≥ SRM acceptance limit CV system config vs. SRM digital extract
Z_total All structural zones covered by the active CV inspection program Inspection zone mapping document

Calculation notes: Each zone must be evaluated against the applicable SRM acceptance limit for its damage mode. Where a zone has multiple damage modes (e.g., corrosion and fatigue cracking), each mode constitutes a separate threshold check. A zone passes only if all applicable mode thresholds meet or exceed SRM limits. The denominator includes only zones actively covered by CV: zones still under manual inspection are excluded until CV coverage extends to them.

Proposed formula, pending validation pilots.

At a Glance

Category
Inspection & Verification Integrity
← Disposition Recommendation Bias Index (DRBI)CV Failure Mode Coverage Score (CVFMCS) →

Assess Your Organization

The AI-GPS Assessment evaluates your AI governance maturity and recommends KPIs like this one for your implementation roadmap.

Take the Free AI-GPS Assessment